What are the operating points of the volute screw press sludge dehydrator?

1. Be sure to be familiar with the instruction manual of the screw stacker before operation, and have a basic understanding of the screw stacker.
2. Make sure the spiral is flexible.
3. Run the prevention and control for 3-5 minutes, check whether each device is normal!
4. Check whether the capacity exceeds the upper limit set by the machine.
5. When dehydrating the sludge machine, we must pay attention to the even distribution to prevent the machine from vibrating!
6. During the running process of the sludge machine, do not use the brake device to avoid accidents!
7. Do not prevent sundries from the top cover of the machine!
8. If the clock blue tape of the slave device has heat and slippage, it should be stopped immediately, and the oil on the tape should be checked, wiped clean with alcohol or gasoline and reused.

https://www.biocell-enviro.com/